Solar Pump Controller

Solar Pump Controller

Desire Energy is manufacturing solar pump controller with the name , Desire solar pump controller
have inbuilt MPPT System, provide efficient working to the solar pumping system and are certified by MNRE,
NISE, ERDA and TUV etc. The pump controller are monitored and operated through mobile application and our web portal at

A remote monitoring marvel coupled with artificial intelligence
India is one of the strongest bastions when it comes to harnessing solar energy. Studied across the nation have revealed that the country has achieved a milestone of producing 20 GW(Gigawatt) of solar energy as on 31st of Jan, 2018. Seeing the consistent development in the solar energy sector, the government of India has set a new milestone of generating 100 GW of energy by 2022 with a 100 billion dollar investment in the sector. The average solar power plant generation capacity in India is 0.20 kWh per m2 of the used land area with a capacity of generating (5 KWH/yr) 5000 trillion kilowatt hours per year.

Captivating Rajasthan

Rajasthan counts itself among the solar-developed states where the photovoltaic capacity touches 2500 MW. The state has managed to attract top-notch investment for India’s leading investors in solar energy rich cities like Jodhpur, Jaisalmer, and Bikaner. There are solar parks installed across the state having the potential of generating 1500 MW of solar energy.

Desire has played an active role in harnessing solar power with its SunAquator technology. With this cutting edge innovation by its R&D engineers, we have managed to tap the solar energy for its multipurpose use. SunAquator with its 100% efficiency, is able to control the water pumping system in a mainstream sector like agriculture, municipal water supply, Fountain Etc.

This SunAquator technology works wonder in Solar Pump Controller as you can monitor the pumping process remotely through this application.

Technical features that make our system stand out from others

  • Double Door Control Panel: This comes with IP-54 protection, powder coated Box that protects the circuitry of the system.
  • Optimal Operating Point calculation Function: The inverter determines the optimal operating point before getting started.
  • Inbuilt MPPT function: This function examines the point that provides maximum power and makes the whole system operational even in low sunshine. Therefore, increasing the overall performance of the installation.
  • Inbuilt detection of sudden changes of conditions (Especially Irradiance): Catches the sudden changes in the operating conditions and changes the working point accordingly.
  • Inbuilt Dry Pump Detection function: The function detects the flow when the water doesn’t reach the pump and send signals to the remote monitoring system.
  • Inbuilt water tank minimum/maximum level detection: The system automatically stops the pump when the water level crosses the maximum limit and starts the pump when the level falls below minimum.
  • Remotely Temporary Jam Clear Operation by Web/App/Support Center
  • Dedicated Tool Kit for Controllers onSite Programming
  • LCD Interface for real-time monitoring & Debugging
  • Reverse Polarity Protection
  • Open Circuit & short Circuit Protection
  • The AquaLogix hardware is a robust design to control the Pump by Mobile Application as well as troubleshooting & Debugging
  • LCD Interface is an integral part of Design for real-time monitoring & Settings
  • Local & Remote ON/OFF Control is the standard feature

Low Power Function

Any anomaly that occurs during the functioning of the system such as dust accumulation of Solar panel that interrupts the process is detected by the low power function and send information to the remote monitoring system.

it’s a Web and App based Secured Solution to control & Interface with IOT Enabled


  • IP address can be set online though the App.
  • Motor can be On/Off through the App.
  • Motor can be driven in both Reverse/Forward direction through the App.
  • We can request the sim details inserted in RMS card through this App.
  • Following Data can be monitor through RMS
    • Input Dc Voltage
    • Motor Voltage
    • Motor Current
    • DC Power
    • Flow Rate / Totalizer
    • All Protections and Errors
    • Remote Programming device
    • Device ID can be set through the message.